- System System 3
- Solar 600 W
- Battery 2 x 100 Ah
- Inverter Xantrex SW1000
- Shop listing System 3: RV 600W
A larger RV system. Six 100 W panels charge two 12 V, 100 Ah lithium batteries through a 50 A Victron controller. A second fuse block gives six protected circuits for small DC loads.
Parts
- 3 x Zamp Solar Obsidian 200W solar panel kit (2 x 100W)
- 1 x Victron SmartSolar MPPT 100/50 charge controller
- 2 x Battle Born 100Ah 12V LiFePO4 battery
- 1 x Xantrex PROwatt SW1000 true sine wave inverter
- 1 x Victron SmartShunt 500A/50mV battery monitor
- 1 x Blue Sea 5191 MRBF terminal fuse block, 30 to 300A
- 1 x Blue Sea 5025 ST Blade fuse block, 6 circuit
See it in the shop: System 3: RV 600W
What it covers
The six panels are wired two in series, with three strings in parallel. This keeps panel voltage under the controller’s 100 V limit. The 600 W total is under the controller’s 700 W rating at 12 V. The Xantrex inverter sets how many watts you can run at once. Check its ratings on the manufacturer’s data sheet against the watts on each device’s label.
Not in this list
Cable, mounts, and the fuses that go in the fuse blocks are not included. Choose them for your wiring.
The parts list is checked against manufacturer ratings. It is not an engineered design.
How we check each list: How we check parts.